Hyundai i30 (PD): Specifications & Consumer information / Vehicle identification number (VIN), Vehicle certification label, Tyre specification and pressure label

Hyundai i30 (PD) 2018-2024 Owner's Manual / Specifications & Consumer information / Vehicle identification number (VIN), Vehicle certification label, Tyre specification and pressure label

Vehicle identification number (VIN)

Hyundai i30. specification and pressure label

■ Frame number

The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

The number is punched on the floor under the driver seat. To check the number, open the cover.

Hyundai i30. specification and pressure label

■ VIN label (if equipped)

The VIN is also on a plate attached to the top of the dashboard. The number on the plate can easily be seen through the windscreen from outside.

Vehicle certification label

Hyundai i30. specification and pressure label

The vehicle certification label attached on the driver’s (or front passenger’s) side centre pillar gives the vehicle identification number (VIN).

Tyre specification and pressure label

Hyundai i30. specification and pressure label

The tyres supplied on your new vehicle are chosen to provide the best performance for normal driving.

The tyre label located on the driver's side centre pillar gives the tyre pressures recommended for your vehicle.

    To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy.

    The engine number is stamped on the engine block as shown in the drawing.

    Other information:

    Hyundai i30 (PD) 2018-2024 Owner's Manual: Engine coolant

    The high-pressure cooling system has a reservoir filled with year-round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant concentration level at least once a year, at the beginning of the winter season, and before travelling to a colder climate.

    Hyundai i30 (PD) 2018-2024 Owner's Manual: Recommended cold tyre inflation pressures

    All tyre pressures (including the spare) should be checked when the tyres are cold. “Cold tyres” means the vehicle has not been driven for at least three hours or has been driven for less than 1 mile (1.6 km). Warm tyres normally exceed recommended cold tyre pressures by 4 to 6 psi (28 to 41 kPa).

    Categories

     
    Copyright © 2025 www.hi30.net - 0.0161