
When the ignition switch is in the ON position or when the engine is running, press the heated steering wheel button to warm the steering wheel. The indicator on the button will illuminate.
To turn the heated steering wheel off, press the button again. The indicator on the button will turn off.
Information
The heated steering wheel will turn off automatically approximately 30 minutes after the heated steering wheel is turned on.
When the engine is turned off during the engine and the heated steering wheel is on, the timer function of heated steering wheel will be reset. To reuse heated steering wheel, press button again.
NOTICE
Do not install any cover or accessory on the steering wheel. This cover or accessory could cause damage to the heated steering wheel system.
WARNING Never adjust the steering wheel whilst driving. You may lose steering control and cause severe personal injury, death or accidents. Information After adjustment, sometimes the lockrelease lever may not lock the steering wheel.
To sound the horn, press the area indicated by the horn symbol on your steering wheel. The horn will operate only when this area is pressed. NOTICE Do not strike the horn severely to operate it, or hit it with your fist.
If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine may be overheating. If this happens, you should: 1. Pull off the road and stop as soon as it is safe to do so. 2.
Checking the washer fluid level Check the fluid level in the washer fluid reservoir and add fluid if necessary. Plain water may be used if washer fluid is not available. However, use washer solvent with antifreeze characteristics in cold climates to prevent freezing.