Hyundai i30 (PD): Electronic Stability Control (ESC) / Indicator lights

Hyundai i30. Indicator lights

When the ignition switch is in the ON position, the ESC indicator light illuminates, then goes off if the ESC system is operating normally.

The ESC indicator light blinks whenever the ESC is operating.

If the ESC indicator light stays on, your vehicle may have a malfunction with the ESC system. When this warning light illuminates we recommend that the vehicle be checked by a HYUNDAI authorised repairer as soon as possible.

The ESC OFF indicator light comes on when the ESC is turned off with the button.

WARNING

When the ESC is blinking, this indicates the ESC is active:

Drive slowly and NEVER attempt to accelerate. NEVER turn the ESC off whilst the ESC indicator light is blinking or you may lose control of the vehicle resulting in an accident.

NOTICE

Driving with wheels and tyres with different sizes may cause the ESC system to malfunction. Before replacing tyres, make sure all four tyres and wheels are the same size. Never drive the vehicle with different sized wheels and tyres installed.

    ESC ON condition When the ignition switch is in the ON position, the ESC and the ESC OFF indicator lights illuminate for approximately three seconds and goes off, then the ESC is turned on.

    When Driving The ESC OFF mode should only be used briefly to help free the vehicle if stuck in snow or mud, by temporarily stopping operation of the ESC, to maintain wheel torque.

    Other information:

    Hyundai i30 (PD) 2018-2024 Owner's Manual: Interior light bulb replacement

    Room lamp If the LED lamp does not operate, we recommend that you have the vehicle checked by a HYUNDAI authorised repairer. Map lamp, room lamp, vanity mirror lamp and luggage compartment lamp 1. Using a flat-head screwdriver, gently pry the lens from the interior light housing.

    Hyundai i30 (PD) 2018-2024 Owner's Manual: Selective Catalytic Reduction

    The Selective Catalytic Reduction (SCR) system is to catalytically convert NOx to Nitrogen and Water by using the reduction agent, the urea solution. Urea gauge The urea solution gauge indicates the approximate amount of remaining urea solution inside the urea solution tank.

    Categories

     
    Copyright © 2025 www.hi30.net - 0.0115