Hyundai i30 (PD): Windows / Remote window closing function

Hyundai i30. function

You can still control the window movement with the engine turned off by pressing the door lock button (1) for more than 3 seconds.The window moves (up), as long as you press the door lock button. The window movement stops, when you release the door lock button. The hazard warning lights blink 3 times, when the window is completely closed.

Information

  • The remote window closing function may abruptly stop, when you move away from your vehicle during the operation. Stay in close proximity of your vehicle, whilst monitoring the window movement.
  • One of the windows may stop operating, when the window is interrupted by certain force. However, the other windows will keep operating. Thus, you should make sure that all windows are closed, and that the hazard warning lights blink 3 times.

    To raise or lower the window, turn the window regulator handle clockwise or counterclockwise. WARNING When opening or closing the windows, make sure your passenger's arms, hands and body are safely out of the way.

    If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control lever located on the overhead console. The ignition switch must be in the ON position before you can open or close the sunroof.

    Other information:

    Hyundai i30 (PD) 2018-2024 Owner's Manual: Smart Cruise Control Vehicleto- Vehicle Distance

    To set Vehicle-to-Vehicle Distance When the Smart Cruise Control System is ON, you can set and maintain the distance from the vehicle ahead of you without pressing the accelerator or brake pedal. Each time the button is pressed, the vehicle to vehicle distance changes as follows: For example, if you drive at 56 mph (90 km/h),

    Hyundai i30 (PD) 2018-2024 Owner's Manual: Front fog lamp

    â–  Type A â–  Type B 1. Loosen the pin-type retainers of the under cover and then remove the undercover. 2. Reach your hand into the back of the front bumper. 3. Disconnect the power connector from the socket. 4. Remove the bulb-socket from the housing by turning the socket counterclockwise until the tabs on the socket align

    Categories

     
    Copyright © 2026 www.hi30.net - 0.0089