If you have a flat tyre, the low Tyre Pressure and Position telltales will come on. We recommend that the system be checked by a HYUNDAI authorised repairer.
CAUTION
It is recommended that you do not use a puncture-repairing agent not approved by HYUNDAI dealer to repair and/or inflate a low pressure tyre. Tyre sealant not approved by HYUNDAI dealer may damage the tyre pressure sensor.
Each wheel is equipped with a tyre pressure sensor mounted inside the tyre behind the valve stem.You must use TPMS specific wheels. It is recommended that you have your tyres serviced by a HYUNDAI authorised repairer.
If you drive the vehicle for about 10 minutes at speeds above 15.5mph (25 km/h) after replacing the low pressure tyre with the spare tyre, the below will happen:
• The TPMS malfunction indicator may blink for approximately 1 minute and then remain continuously illuminated because the TPMS sensor is not mounted on the spare wheel.
You may not be able identify a tyre with low pressure by simply looking at it. Always use a good quality tyre pressure gauge to measure the tyre's inflation pressure. Please note that a tyre that is hot (from being driven) will have a higher pressure measurement than a tyre that is cold (from sitting stationary for at least 3 hour and driven less than 1 mile (1.6 km) during that 3 hour period).
Allow the tyre to cool before measuring the inflation pressure. Always be sure the tyre is cold before inflating to the recommended pressure.
A cold tyre means the vehicle has been sitting for 3 hours and driven for less than 1 mile (1.6 km) in that 3 hour period.
WARNING
WARNING
Tampering with, modifying, or disabling the Tyre Pressure Monitoring System (TPMS) components may interfere with the system's ability to warn the driver of low tyre pressure conditions and/or TPMS malfunctions. Tampering with, modifying, or disabling the Tyre Pressure Monitoring System (TPMS) components may void the warranty for that portion of the vehicle.
WARNING
❈All vehicles sold in the EUROPE market during below period must be equipped with TPMS.
- New model vehicle :
Nov. 1, 2012 ~
- Current model vehicle :
Nov. 1, 2014~ (Based on
vehicle registrations)
The TPMS malfunction indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tyre Pressure Monitoring System.
WARNING Changing a tyre can be dangerous. Follow the instructions in this section when changing a tyre to reduce the risk of serious injury or death.
F
Full size tyre *1 : In order to drive at high speed(over 100mph or 160km/h) where the speed is lega, adjust tyre pressure as shown in above table. Compact spare tyre NOTICE It is permissible to add 3 psi (20 kPa) to the standard tyre pressure specification if colder temperatures are expected soon.