Hyundai i30 (PD): Driver position memory system / Recalling memory positions

1. Move the shift lever into P (Park) whilst the ignition switch or the Engine Start/Stop button is in the ON position.

2. Press the desired memory button (1 or 2). The system will beep once, then the driver’s seat position, outside rearview mirror and instrument panel illumination will automatically adjust to the stored position (if equipped).

3. "Driver 1(or 2) settings is applied" will appear on the LCD display.

Information

• Whilst recalling the "1" memory position, pressing the SET or 1 button temporarily stops the adjustment of the recalled memory position. Pressing the 2 button recalls the "2" memory position.
• Whilst recalling the "2" memory position, pressing the SET or 2 button temporarily stops the adjustment of the recalled memory position. Pressing the 1 button recalls the "1" memory position.
• Whilst recalling the stored positions, pressing one of the control buttons for the driver's seat, outside rearview mirror, or instrument panel illumination will cause the movement of that component to stop and move in the direction that the control button is pressed.