The system will move the driver's seat automatically as follows:
The shift lever is in P (Park)
• Without smart key system
- It will move the driver’s seat rearward
when the ignition key is
removed and the driver’s door is
opened.
- It will move the driver’s seat forward
when the ignition key is inserted.
• With smart key system
- It will move the driver’s seat rearward
when the Engine Start/Stop
button is in the OFF position and
the driver’s door is opened.
- It will move the driver’s seat forward
when the vehicle is turned
ON or the driver’s door is closed
with the smart key with you.
You can activate or deactivate the Easy Access Function from the User Settings mode on the LCD display. For more details, refer to "LCD Display" in this chapter.
CAUTION
Driver should be cautious when using this function to assure no injury to passenger or child on the back seat. In case of emergency the driver has to stop movement of front seat (when easy access feature is activated) by pressing SET button or any of the driver seat control switches.
1. Move the shift lever into P (Park) whilst the ignition switch or the Engine Start/Stop button is in the ON position. 2. Press the desired memory button (1 or 2).
Electric power steering (EPS) The system assists you with steering the vehicle. If the engine is off or if the power steering system becomes inoperative, the vehicle may still be steered, but it will require increased steering effort.
Towbars Information The mounting hole for towbars are located on both sides of the underbody behind the rear tyres. It's important to have the correct towbar equipment. Crosswinds, large trucks going by, and rough roads are a few reasons why you’ll need the right towbar.
Full size tyre *1 : In order to drive at high speed(over 100mph or 160km/h) where the speed is lega, adjust tyre pressure as shown in above table. Compact spare tyre NOTICE It is permissible to add 3 psi (20 kPa) to the standard tyre pressure specification if colder temperatures are expected soon.