
Your HYUNDAI uses a remote key, which you can use to lock or unlock a door (and tailgate) and even start the engine.
1. Door Lock
2. Door Unlock
3. Tailgate Unlock
Locking
To lock:
1. Close all doors, engine bonnet and tailgate.
2. Press the Door Lock button (1) on the remote key.
3. The doors will lock. The hazard warning lights will blink. Also, the outside rearview mirror will fold, if the outside rearview mirror folding switch is in the AUTO position (if equipped).
4. When the doors are locked, the indicator light on the central door lock/unlock switch will be illuminated.
WARNING
Do not leave the keys in your vehicle with unsupervised children. Unattended children could place the key in the ignition switch and may operate power windows or other controls, or even make the vehicle move, which could result in serious injury or death.
Unlocking
To unlock:
1. Press the Door Unlock button (2) on the remote key.
2. The doors will unlock. The hazard warning lights will blink two times. Also, the outside rearview mirror will unfold, if the outside rearview mirror folding switch is in the AUTO position (if equipped).
Information
After unlocking the doors, the doors will lock automatically after 30 seconds unless a door is opened.
Tailgate unlocking
To unlock:
1. Press the Tailgate Unlock button (3) on the remote key for more than one second.
2. The hazard warning lights will blink two times.
Information
The word "HOLD" is written on the button to inform you that you must press and hold the button for more than one second.
Start-up
For detailed information refer to “Key Ignition Switch” in chapter 5.
NOTICE
To prevent damaging the remote key:

If the remote key does not operate normally, you can lock or unlock the door by using the mechanical key.
To unfold the key, press the release button then the key will unfold automatically.
To fold the key, fold the key manually whilst pressing the release button.
NOTICE
Do not fold the key without pressing the release button. This may damage the key.
The remote key will not work if any of the following occur:
If the remote key does not work correctly, open and close the door with the mechanical key. If you have a problem with the remote key, it is recommended that you contact a HYUNDAI authorised repairer.
If the remote key is in close proximity to your mobile phone, the signal could be blocked by your mobile phone's normal operational signals.
This is specifically relevant when the phone is active such as making and receiving calls, text messaging, and/or sending/receiving emails. Avoid placing the remote key and your mobile phone in the same location and always try to maintain an adequate distance between the two devices.
Information
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. If the keyless entry system is inoperative due to changes or modifications not expressly approved by the party responsible for compliance, it will not be covered by your manufacturer’s vehicle warranty.
NOTICE
Keep the remote key away from electromagnetic materials that block electromagnetic waves to the key surface.
If the remote key is not working properly, try replacing the battery with a new one.

Battery Type: CR2032
To replace the battery:
1. Insert a slim tool into the slot and gently pry open the cover.
2. Using a screw driver, remove the battery cover.
3. Remove the old battery and insert a new battery. Make sure the battery position is correct.
4. Reinstall the battery cover and key cover in the reverse order of removal.
If you suspect your remote key might have sustained some damage, or you feel your remote key is not working correctly, it is recommended that you contact a HYUNDAI authorised repairer.
Information
An inappropriately disposed battery can be harmful to the environment and human health. Dispose of the battery according to your local law(s) or regulations.
Your HYUNDAI uses a Smart Key, which you can use to lock or unlock a door (and tailgate) and even start the engine. 1. Door Lock 2. Door Unlock 3.
You can check the tyre pressure in the Assist mode on the cluster. Refer to the "LCD Display Modes" in chapter 3. Tyre pressure is displayed after a few minutes of driving after initial engine start up. If tyre pressure is not displayed when the vehicle is stopped, "Drive to display" message will appear.
The TPMS malfunction indicator will illuminate after it blinks for approximately one minute when there is a problem with the Tyre Pressure Monitoring System. We recommend that the system be checked by a HYUNDAI authorised repairer. NOTICE If there is a malfunction with the TPMS, the low tyre pressure position telltale will not