Hyundai i-30: General Information / Troubleshooting

Hyundai i30 (PD) 2018-2025 Service Manual / Driveshaft and axle / General Information / Troubleshooting

Troubleshooting

Trouble Symptom	Probable cause	Remedy
Vehicle pulls to one side	Scoring of driveshaft ball joint	Replace
	Wear, rattle or scoring of wheel bearing	Replace
	Defective front suspension and steering	Adjustment or Replace
Vibartion	Wear, damage or bending of driveshaft	Replace
	Driveshaft rattle and hub serration	Replace
	Wear, rattle or scratching of wheel bearing	Replace
Shimmy	Defective wheel balance	Adjustment or Replace
Shimmy	Defective front suspension and steering	Adjustment or Replace
Excessive noise	Wear, damage or bending of driveshaft	Replace
	Rattle of driveshaft and worn hub splines	Replace
	Wear, rattle or scoring of wheel bearing	Replace
	Loose hub nut	Adjustment or Replace
	Defective front suspension and steering	Adjustment or Replace

Special service tools

Front Axle Assembly. Front Hub / Knuckle

Other information:

Hyundai i30 (PD) 2018-2025 Service Manual: Rear Wheel Speed Sensor

Components and components location Components 1. Front wheel speed sensor 2. Front wheel speed sensor cable Repair procedures Removal 1. Loosen the wheel nuts slightly...

Hyundai i30 (PD) 2018-2025 Service Manual: Engine Coolant Temperature Sensor (ECTS)

Description and operation Description The Engine Coolant Temperature Sensor (ECTS) is located in the cylinder block and cylinder head, and measures the temperature of the engine coolant. The thermistor of the cooling water temperature and resistance has a negative temperature coefficient (NTC) where the resistance decreases when the temperature rises and the resistance increases when the temperature decreases...