Manual transmission shift indicator

This indicator informs which gear is recommended whilst driving, to save fuel.
For example
: Indicates that shifting up to
the
3rd gear is recommended (currently
the shift lever is in the
2nd or 1st gear).
: Indicates that shifting down to
the 3rd gear is recommended
(currently the shift lever is in the
4th, 5th, or 6th gear).
When the system is not working properly, the indicator is not displayed.
Automatic transmission shift indicator

This indicator displays which automatic transmission shift lever position is selected.
Dual clutch transmission shift indicator

This indicator displays which shift lever position is selected.
Shift Indicator Pop-up

The pop-up that indicates the current gear position is displayed in the cluster for about 2 seconds when shifting into other positions (P/R/N/D).
Automatic transmission shift indicator / Dual clutch transmission shift indicator

In the manual shift mode, this indicator informs which gear is desired whilst driving to save fuel.
For example
: Indicates that shifting up to
the
3rd gear is desired (currently
the shift lever is in the 2nd or
1st gear).
: Indicates that shifting down to
the 3rd gear is desired (currently
the shift lever is in the 4th,
5th, or 6th gear).
When the system is not working properly, the indicator is not displayed.
Speedometer The speedometer indicates the speed of the vehicle and is calibrated in kilometers per hour (km/h) and/or miles per hour (MPH). Tachometer The tachometer indicates the approximate number of engine revolutions per minute (rpm).
Information Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention.
Checking the parking brake Check the stroke of the parking brake by counting the number of “clicks’’ heard whilst fully applying it from the released position. Also, the parking brake alone should securely hold the vehicle on a fairly steep grade.
1. Loosen the pin-type retainers and screws of the rear wheel guard and then detach it from the rear bumper. 2. Reach your hand into the back of the rear bumper. 3. Remove the socket from the housing by turning the socket counterclockwise until the tabs on the socket align with the slots of the housing.