Hyundai i30 (PD): Braking system / Electronic Parking Brake (EPB)
Applying the parking brake
To apply the EPB (Electronic Parking Brake):
1. Depress the brake pedal.
2. Pull up the EPB switch.
Make sure the Parking Brake Warning Light comes on.
WARNING
To reduce the risk of SERIOUS INJURY or DEATH, do not operate the EPB whilst the vehicle is moving except in an emergency situation. It could damage the brake system and lead to an accident.
Always set the parking brake before leaving the vehicle, to apply: Firmly depress the brake pedal. Pull up the parking brake lever as far as possible.
To release the EPB (Electronic Parking Brake), press the EPB switch in the following condition: Place the Engine Start/Stop button in the ON position.
Other information:
Hyundai i30 (PD) 2018-2024 Owner's Manual: Check tyre pressure
You can check the tyre pressure in the Assist mode on the cluster. Refer to the "LCD Display Modes" in chapter 3. Tyre pressure is displayed after a few minutes of driving after initial engine start up. If tyre pressure is not displayed when the vehicle is stopped, "Drive to display" message will appear.
Hyundai i30 (PD) 2018-2024 Owner's Manual: Fuses
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 (or 3) fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment. If any of your vehicle’s lights, accessories, or controls do not work, check the appropriate circuit fuse.
Categories
- Manuals Home
- Hyundai i30 Owners Manual
- Cruise control
- Engine coolant
- Drive mode integrated control system
- New on site
- Most important about car
