Hyundai i-30: Dual Clutch Transmission Control System / Description and operation
The Dual Clutch Transmission (DCT) control system measures required data to
identify the state of the control target and computes the appropriate compensation
value if adjustment is necessary. The actuator is controlled according to the
computed compensation value to obtain desired output.
If transmission or driving-performance-related failure is detected, first perform
self-diagnosis and basic transmission inspection (oil check).
Then use the diagnostic tool to inspect the transmission control system components.
Description and operation
Description
•
Function
The Transmission Control Module (TCM) is like the brain for the Dual
Clutch Transmission (DCT)...
Other information:
To install or remove a roof carrier,
you can use the mounting bracket
and cover on the roof.
When you install a roof carrier, use
the following procedure.
1. Insert a slim tool(coin or flat blade
driver) into the slot and slide the
cover toward the arrow on the
cover...
Description and operation
Description
The compressor is the power unit of the A/C system.
It is located on the side of engine block and driven by a V-belt of the engine.
The compressor changes low pressure and low temperature refrigerant gas into
high pressure and high temperature refrigerant gas...
Categories
Seat belt warning
Driver’s seat belt warning
■ Instrument cluster
As a reminder to the driver, the seat
belt warning light will illuminate for
approximately 6 seconds each time
you turn the ignition switch ON
regardless of belt fastening.
read more