Hyundai i-30: Accessing your vehicle / Immobiliser system

Hyundai i30 (PD) 2018-2024 Owner's Manual / Convenient features of your vehicle / Accessing your vehicle / Immobiliser system

The immobiliser system protects your vehicle from theft. If an improperly coded key (or other device) is used, the engine’s fuel system is disabled.

When the ignition switch is placed in the ON position, the immobiliser system indicator should come on briefly, then go off. If the indicator starts to blink, the system does not recognise the coding of the key.

Place the ignition switch to the LOCK/OFF position, then place the ignition switch to the ON position again.

The system may not recognise your key’s coding if another immobiliser key or other metal object (i.e., key chain) is near the key. The engine may not start because the metal may interrupt the transponder signal from transmitting normally.

If the system repeatedly does not recognise the coding of the key, it is recommended that you contact your HYUNDAI dealer.

Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle inoperable.

WARNING

In order to prevent theft of your 3 vehicle, do not leave spare keys anywhere in your vehicle. Your immobiliser password is a customer unique password and should be kept confidential.

NOTICE

The transponder in your key is an important part of the immobiliser system. It is designed to give years of trouble-free service, however you should avoid exposure to moisture, static electricity and rough handling. Immobiliser system malfunction could occur.

    Battery replacement

    If the Smart Key is not working properly, try replacing the battery with a new one. Battery Type: CR2032 To replace the battery: 1. Remove the mechanical key...

    Door locks

    Operating door locks from outside the vehicle Mechanical key Turn the key toward the rear of the vehicle to unlock and toward the front of the vehicle to lock...

    Other information:

    Hyundai i30 (PD) 2018-2024 Service Manual: RCV Control Solenoid Valve


    Description and operation Description RCV (Recirculation Valve) Control Solenoid Valve is installed on the cooling pan motor top and operates the RCV actuator which controls the by-pass passage of the turbo-charger compressor. When the throttle valve is closed during engine running [Tip-out], crash noise of the impeller will occur because of rapid increasing of the boost pressure...

    Hyundai i30 (PD) 2018-2024 Owner's Manual: Emergency braking


    If there is a problem with the brake pedal whilst driving, emergency braking is possible by pulling up and holding the EPB switch. Braking is possible only whilst you are holding the EPB switch. However, braking distance will be longer than normal...

    Categories

    Tailgate

    Opening the tailgate

    Hyundai i30. Tailgate

    ■ 5 Door, Wagon

    Hyundai i30. Tailgate

    ■ Fastback

    read more


     
    Copyright © 2024 www.hi30.net