Hyundai i-30: General Information / Specifications
Hyundai i30 (PD) 2018-2024 Service Manual / Suspension System (NON-ECS) / General Information / Specifications
| Specifications |
Front Suspension
|
Item |
Specification |
|
|
Suspension type |
Mac Pherson Strut |
|
|
Shock absorber |
Type |
Conventional valve |
Rear Suspension
|
Item |
Specification |
|
|
Suspension type |
Multi link |
|
|
Shock absorber |
Type |
Conventional valve |
Wheel & Tire
|
Item |
Specification |
|||||
|
Normal load |
Maximum load |
|||||
|
Front |
Rear |
Front |
Rear |
|||
|
Wheel |
Aluminum |
6.0J * 15 |
||||
|
6.5J * 16 |
||||||
|
7.0J * 17 |
||||||
|
7.5J * 18 |
||||||
|
Steel |
6.0J * 15 |
|||||
|
Tire |
195/65 R15 |
|||||
|
205/55 R16 |
||||||
|
225/45 R17 |
||||||
|
225/40 ZR18 |
||||||
|
Spare tire |
T125/80 D15 |
|||||
|
T125/80 D16 |
||||||
|
pressure kPa (psi) |
195/65 R15 |
220 (32) |
220 (32) |
235 (34) |
250 (36) |
|
|
205/55 R16 |
220 (32) |
220 (32) |
235 (34) |
275 (40) |
||
|
225/45 R17 |
220 (32) |
220 (32) |
235 (34) |
275 (40) |
||
|
225/40 ZR18 |
for Fastback |
240 (35) |
235 (34) |
250 (36) |
275 (40) |
|
|
for N line |
240 (35) |
240 (35) |
250 (36) |
275 (40) |
||
|
T125/80 D15 |
420 (60) |
|||||
|
T125/80 D16 |
420 (60) |
|||||
Wheel Alignment
|
Item |
Specification |
||
|
Front |
Rear |
||
|
Toe-in |
Individual |
0.05° ± 0.1° |
0.07° ± 0.1° |
|
Total |
0.1° ± 0.2° |
0.14° ± 0.2° |
|
|
Camber angle |
Europe |
-0.5° ± 0.5° |
-1.2° ± 0.5° |
|
Russia |
-0.4° ± 0.5° |
||
|
Caster angle |
6.4° ± 0.5° |
- |
|
|
King-pin angle |
14.5° ± 0.5° |
- |
|
|
Ride height |
Europe |
375 ± 10 mm (14.76 ± 0.4 Inch) |
378 ± 10 mm (14.88 ± 0.4 Inch) |
|
Russia |
385 ± 10 mm (15.16 ± 0.4 Inch) |
388 ± 10 mm (16.38 ± 0.4 Inch) |
|
| Tightening Torques |
Front Suspension
|
Item |
Tightening torque (kgf.m) |
||
|
N.m |
kgf.m |
lb-ft |
|
|
Hub nuts |
107.9 - 127.5 |
11.0 - 13.0 |
79.6 - 94.0 |
|
Lower arm to sub frame (Front) |
117.7 - 137.3 |
12.0 - 14.0 |
86.8 - 101.3 |
|
Lower arm to sub frame (Rear) |
156.9 - 176.5 |
16.0 - 18.0 |
115.7 - 130.2 |
|
Lower arm to knuckle |
58.8 - 70.6 |
6.0 - 7.2 |
43.4 - 52.1 |
|
Tie rod end castle nut |
24.5 - 34.3 |
2.5 - 3.5 |
18.1 - 25.3 |
|
Steering gear box to sub frame |
88.3 - 107.9 |
9.0 - 11.0 |
65.1 - 79.6 |
|
Stabilizer bar to stabilizer link |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
Stabilizer bar to sub frame |
44.1 - 53.9 |
4.5 - 5.5 |
32.5 - 39.8 |
|
Stabilizer bar to front strut assembly |
98.1 - 117.7 |
10.0 - 12.0 |
72.3 - 86.8 |
|
Front strut assembly to front axle |
156.9 - 176.5 |
16.0 - 18.0 |
115.7 - 130.2 |
|
Sub frame mounting bolt & nut |
176.5 - 196.1 |
18.0 - 20.0 |
130.2 - 144.7 |
|
Sub frame stay bolt |
44.1 - 53.9 |
4.5 - 5.5 |
32.5 - 39.8 |
|
Bolt connecting universal joint to pinion (M8 BOLT) |
32.4 - 37.3 |
3.3 - 3.8 |
23.8 - 27.5 |
|
Bolt connecting universal joint to pinion (M10 BOLT) |
49.0 - 58.8 |
5.0 - 6.0 |
36.2 - 43.4 |
|
Roll rod bracket to roll rod support bracket fixing bolt & nut |
107.9 - 127.5 |
11.0 - 13.0 |
79.6 - 94.0 |
Rear Suspension
|
Item |
Tightening torque (kgf.m) |
||
|
N.m |
Kgf.m |
lb-ft |
|
|
Hub nuts |
107.9 - 127.5 |
11.0 - 13.0 |
79.6 - 94.0 |
|
Trailing arm to body |
98.1 - 117.7 |
10.0 -12.0 |
72.3 - 86.8 |
|
Trailing arm to knuckle |
137.3 - 156.9 |
14.0 -16.0 |
101.3 - 115.7 |
|
Assist arm to sub frame |
107.9 - 117.7 |
11.0 - 12.0 |
79.6 - 86.8 |
|
Assist arm to knuckle |
137.3 - 156.9 |
14.0 -16.0 |
101.3 - 115.7 |
|
Lower arm to sub frame |
107.9 - 117.7 |
11.0 - 12.0 |
79.6 - 86.8 |
|
Lower arm to knuckle |
137.3 - 156.9 |
14.0 -16.0 |
101.3 - 115.7 |
|
Upper arm to sub frame |
98.1 - 117.7 |
10.0 -12.0 |
72.3 - 86.8 |
|
Upper arm to knuckle |
98.1 - 117.7 |
10.0 -12.0 |
72.3 - 86.8 |
|
Shock absorber to frame |
58.8 - 73.5 |
6.0 - 7.5 |
43.4 - 54.2 |
|
Stabilizer bar to stabilizer link |
98.1 - 117.7 |
10.0 -12.0 |
72.3 - 86.8 |
|
Stabilizer bar to stabilizer link |
58.8 - 78.5 |
6.0 - 8.0 |
43.4 - 57.9 |
|
Stabilizer bar to sub frame |
44.1 - 53.9 |
4.5 - 5.5 |
32.5 - 39.8 |
|
cross member monuting bolt |
137.3 - 156.9 |
14.0 - 16.0 |
101.3 - 115.7 |
Special service tools
Special Service Tools
Tool (Number and Name)
Illustration
Use
09568-1S100
Saperate the ball joint from the front alxe
09546-3X100
Shock absorber lock nut removal tool
Used for remove the shock absorber lock nut...
Other information:
Hyundai i30 (PD) 2018-2024 Owner's Manual: Air cleaner
Filter replacement The air cleaner filter can be cleaned for inspection using compressed air. Do not attempt to wash or to rinse it, as water will damage the filter. If soiled, the air cleaner filter must be replaced. 1. Loosen the air cleaner cover attaching clips and open the cover...
Hyundai i30 (PD) 2018-2024 Service Manual: Special service tools
..
Categories
- Manuals Home
- 3rd Generation i30 Owners Manual
- 3rd Generation i30 Service Manual
- Battery replacement
- Jump starting procedure
- FCA sensor
- New on site
- Most important about car
Tailgate
Opening the tailgate
■ 5 Door, Wagon
■ Fastback
Copyright © 2024 www.hi30.net