Hyundai i30 (PD): Maintenance / Air cleaner
Filter replacement
The air cleaner filter can be cleaned for inspection using compressed air.
Do not attempt to wash or to rinse it, as water will damage the filter.
If soiled, the air cleaner filter must be replaced.
1. Loosen the air cleaner cover attaching clips and open the cover.
2. Wipe the inside of the air cleaner.
3. Replace the air cleaner filter.
4. Lock the cover with the cover attaching clips.
5. Check that the cover is firmly installed.
Information
Be sure to insert the hinge (A) before locking the cover with the cover attaching clips.
Information
If the vehicle is operated in extremely dusty or sandy areas, replace the element more often than the usual recommended intervals.
NOTICE
- Do not drive with the air cleaner filter removed. This will result in excessive engine wear.
- When removing the air cleaner filter, be careful that dust or dirt does not enter the air intake, or damage may result.
- Use HYUNDAI genuine parts. Use of non-genuine parts could damage the air flow sensor.
Draining water from fuel filter The fuel filter in the diesel engine operates the critical function of separating water from the fuels and preventing accumulating of water in the base.
Filter inspection If the vehicle is operated in the severely air-polluted cities or on dusty rough roads for a long period, it should be inspected more frequently and replaced earlier.
Other information:
Hyundai i30 (PD) 2018-2024 Owner's Manual: Recommended cold tyre inflation pressures
All tyre pressures (including the spare) should be checked when the tyres are cold. “Cold tyres” means the vehicle has not been driven for at least three hours or has been driven for less than 1 mile (1.6 km). Warm tyres normally exceed recommended cold tyre pressures by 4 to 6 psi (28 to 41 kPa).
Hyundai i30 (PD) 2018-2024 Owner's Manual: Rear fog lamp
1. Loosen the pin-type retainers and screws of the rear wheel guard and then detach it from the rear bumper. 2. Reach your hand into the back of the rear bumper. 3. Remove the socket from the housing by turning the socket counterclockwise until the tabs on the socket align with the slots of the housing.
Categories
- Manuals Home
- Hyundai i30 Owners Manual
- Specifications & Consumer information
- Scheduled maintenance services
- Explanation of scheduled maintenance items
- New on site
- Most important about car
