Hyundai i30 (PD): Manual heating and air conditioning / Fan speed control. Air conditioning. OFF mode
Fan speed control
The fan speed can be set as desired by pushing the fan speed control button.
More air is delivered with higher fan speeds.
Pressing the OFF button turns off the fan.
NOTICE
Operating the fan when the ignition switch is in the ON position could cause the battery to discharge. Operate the fan when the engine is running.
Air conditioning
Push the A/C button to turn the air conditioning system on (indicator light will illuminate).
Push the button again to turn the air conditioning system off.
OFF mode
Push the OFF button to turn the climate control system off. However, you can still operate the mode and air intake buttons as long as the ignition switch is in the ON position.
This is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button.
Ventilation 1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position.
Other information:
Hyundai i30 (PD) 2018-2024 Owner's Manual: If you have a flat tyre (with tyre mobility kit)
■ Type A ■ Type B For safe operation, carefully read and follow the instructions in this manual before use. (1) Compressor (2) Sealant bottle The Tyre Mobility Kit is a temporary fix to the tyre and we recommend that the system be inspected by a HYUNDAI authorised repairer.
Hyundai i30 (PD) 2018-2024 Owner's Manual: Tyre rotation
To equalize tread wear, HYUNDAI recommends that the tyres be rotated every 7,500 miles (12,000 km) or sooner if irregular wear develops. During rotation, check the tyres for correct balance. When rotating tyres, check for uneven wear and damage.
Categories
- Manuals Home
- Hyundai i30 Owners Manual
- Horn
- Cargo security screen (wagon)
- Battery replacement
- New on site
- Most important about car
