Climate control air filter

This filter is installed behind the glove box. It filters the dust or other pollutants that enter the vehicle through the heating and air conditioning system.
We recommend that the climate control air filter be replaced by a HYUNDAI authorised repairer according to the maintenance schedule. If the vehicle is being driven in severe conditions such as dusty or rough roads, more frequent climate control filter inspections and changes are required.
If the air flow rate suddenly decreases, we recommend the system be checked at a HYUNDAI authorised repairer.
NOTICE
It is important that the correct type and amount of oil and refrigerant is used. Otherwise, damage to the compressor and abnormal system operation may occur.
Checking the amount of air conditioner refrigerant and compressor lubricant
When the amount of refrigerant is low, the performance of the air conditioning is reduced. Overfilling also reduces the performance of the air conditioning system.
Therefore, if abnormal operation is found, we recommend that the system be inspected by a HYUNDAI authorised repairer.
WARNING
Vehicles equipped with R-134a
Because the
refrigerant
is at very high
pressure, the air conditioning
system should
only be serviced by trained and
certified technicians. It is important
that the correct type and
amount of oil and refrigerant is
used. Otherwise, it may cause
damage to the vehicle and personal
injury.
WARNING
Vehicles equipped with R-1234yf

.webp)
Because the refrigerant is mildly inflammable at very high pressure, the air conditioning system should only be serviced by trained and certified technicians. It is important that the correct type and amount of oil and refrigerant is used. Otherwise, it may cause damage to the vehicle and personal injury.
We recommend the air conditioning system be serviced by a HYUNDAI authorised repairer.
Air conditioning refrigerant label

The actual Air Conditioning refrigerant label in the vehicle may differ from the illustration.
Each symbols and specification on air conditioning refrigerant label means as below:
1. Classification of refrigerant
2. Amount of refrigerant
3. Classification of Compressor lubricant
You can find out which air conditioning refrigerant is applied to your vehicle on the label located inside of the bonnet.
Refer to chapter 8 for the location of the air conditioning refrigerant label.
Ventilation 1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position.
1. Passenger’s temperature control knob 2. Driver’s temperature control knob 3. SYNC button 4. OFF button 5. Fan speed control button 6.
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.
■ Blade type fuse ■ Cartridge type fuse 1. Turn the vehicle off. 2. Turn all other switches OFF. 3. Remove the fuse panel cover by pressing the tap and pulling up. 4. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.