Hyundai i30 (PD): Forward collision-avoidance assist (FCA) system - sensor fusion type (front radar + front camera) / System malfunction

Hyundai i30. System malfunction

Check FCA (Forward Collision Avoidance Asst.)

  • When the FCA is not working properly, the FCA warning light (Hyundai i30. System malfunction) will illuminate and the warning message will appear for a few seconds. After the message disappears, the master warning light (Hyundai i30. System malfunction) will illuminate. In this case, we recommend that you have the vehicle inspected by a HYUNDAI authorised repairer.
  • The FCA warning message may appear along with the illumination of the ESC (Electronic Stability Control) warning light.

WARNING

  • The FCA is only a supplemental system for the driver's convenience. The driver should hold the responsibility to control the vehicle operation. Do not solely depend on the FCA system. Rather, maintain a safe braking distance, and, if necessary, depress the brake pedal to reduce the driving speed.
  • In certain instances and under certain driving conditions, the FCA system may activate unintentionally. This initial warning message appears on the LCD display with a warning chime. Also, in certain instances the front radar sensor or camera recognition system may not detect the vehicle or pedestrian ahead. The FCA system may not activate and the warning message will not be displayed.
  • Even if there is any problem with the brake control function of the FCA system, the vehicle’s basic braking performance will operate normally. However, brake control function for avoiding collision will not activate.
  • If the vehicle in front stops suddenly, you may have less control of the brake system. Therefore, always keep a safe distance between your vehicle and the vehicle in front of you.
  • The FCA system may activate during braking and the vehicle may stop suddenly shifting loose objects toward the passengers. Always keep loose objects secured.
  • The FCA system may not activate if the driver applies the brake pedal to avoid a collision.
  • The FCA system may not activate according to the road conditions, inclement weather, driving conditions or traffic conditions.
  • The brake control may be insufficient, possibly causing a collision, if a vehicle in front abruptly stops. Always pay extreme caution.
  • Occupants may get injured, if the vehicle abruptly stops by the activated FCA system. Pay extreme caution.

WARNING

  • The FCA system does not operate when the vehicle is in reverse.
  • The FCA system is not designed to detect other objects on the road such as animals.
  • The FCA system does not detect vehicles in the opposite lane.
  • The FCA system does not detect cross traffic vehicles that are approaching.
  • The FCA system cannot detect the driver approaching the side view of a parked vehicle (for example on a dead end street.)

In these cases, you must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce the driving speed in order to maintain a safe distance.

    ■ Front radar ■ Front camera In order for the FCA system to operate properly, always make sure the sensor cover or sensor is clean and free of dirt, snow, and debris.

    The Forward Collision avoidance assist (FCA) system system is designed to monitor the vehicle ahead or a pedestrian in the roadway through radar signals and camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking.

    Other information:

    Hyundai i30 (PD) 2018-2024 Owner's Manual: Smart cruise control (SCC) with stop & go system

    ➀ Cruise indicator ➁ Set speed ➂ Vehicle-to-vehicle distance To see the SCC screen on the LCD display in the cluster, select ASSIST mode (). For more information, refer to “LCD Display Modes” in chapter 3. The Smart Cruise Control System allows you to program the vehicle to maintain constant speed and minimum distanc

    Hyundai i30 (PD) 2018-2024 Owner's Manual: Notes on the safe use of the Tyre Mobility Kit

    Park your car at the side of the road so that you can work with the Tyre Mobility Kit away from moving traffic. To be sure your vehicle will not move, even when you're on fairly level ground, always set your parking brake. Only use the Tyre Mobility Kit for sealing/ inflation passenger car tyres.

    Categories

     
    Copyright © 2026 www.hi30.net - 0.0115