Hyundai i30 (PD): Driving your vehicle / Forward collision-avoidance assist (FCA) system - sensor fusion type (front radar + front camera)
The Forward Collision-Avoidance Assist (FCA) system is designed to help detect and monitor the vehicle ahead or detect a pedestrian (if equipped) in the roadway through radar signals and camera recognition to warn the driver that a collision is imminent, and if necessary, apply emergency braking.
WARNING
Take the following precautions when using the Forward Collision-Avoidance Assist (FCA) system:
- This system is only a supplemental system and it is not intended to, nor does it replace the need for extreme care and attention of the driver. The sensing range and objects detectable by the sensors are limited. Pay attention to the road conditions at all times.
- NEVER drive too fast in accordance with the road conditions or whilst cornering.
- Always drive cautiously to prevent unexpected and sudden situations from occurring. FCA does not stop the vehicle completely and is not a collision avoidance system.
- System setting and activation
- FCA warning message and system control
- FCA sensor
- System malfunction
- Limitations of the system
The driver must be cautious in the below situations, because the system may not detect other vehicles or objects in certain circumstances. The vehicle drives on a curved road or through a tollgate.
System setting • The driver can activate the FCA by placing the ignition switch to the ON position and by selecting: "User Settings → Driver Assistance → FCA (Forward Collision-Avoidance Assist)" The FCA deactivates, when the driver cancels the system setting.
Other information:
Hyundai i30 (PD) 2018-2024 Owner's Manual: If the engine overheats
If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine may be overheating. If this happens, you should: 1. Pull off the road and stop as soon as it is safe to do so. 2.
Hyundai i30 (PD) 2018-2024 Owner's Manual: Wheel alignment and tyre balance
The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tyre life and best overall performance. In most cases, you will not need to have your wheels aligned again. However, if you notice unusual tyre wear or your vehicle pulling one way or the other, the alignment may need to be reset.
Categories
- Manuals Home
- Hyundai i30 Owners Manual
- Maintenance services
- Brake/clutch fluid
- Explanation of scheduled maintenance items
- New on site
- Most important about car
