Hyundai i30 (PD): Manual heating and air conditioning / Temperature control
The temperature will increase by turning the knob to the right. The temperature will decrease by turning the knob to the left.
Adjusting the driver and passenger side temperature equally
- Press the “SYNC” button to adjust the driver and passenger side temperature equally. The passenger side temperature will be set to the same temperature as the driver side temperature.
- Turn the driver side temperature control knob. The driver and passenger side temperature will be adjusted equally.
Adjusting the driver and passenger side temperature individually
Press the “SYNC” button again to adjust the driver and passenger side temperature individually. The button indicator will turn off.
Temperature conversion
If the battery has been discharged or disconnected, the temperature mode display will reset to Centigrade.
To change the temperature unit from °C to °F or °F to °C :
- Automatic climate control system
Press the AUTO button for 3 seconds
whilst pressing the OFF button.
- Instrument cluster
Go to User Settings Mode → Other
Features →Temperature Unit.
The mode selection button controls the direction of the air flow through the ventilation system. Defrost-Level (A, D) Most of the air flow is directed to the windscreen.
This is used to select the outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button.
Other information:
Hyundai i30 (PD) 2018-2024 Owner's Manual: Notes on the safe use of the Tyre Mobility Kit
Park your car at the side of the road so that you can work with the Tyre Mobility Kit away from moving traffic. To be sure your vehicle will not move, even when you're on fairly level ground, always set your parking brake. Only use the Tyre Mobility Kit for sealing/ inflation passenger car tyres.
Hyundai i30 (PD) 2018-2024 Owner's Manual: Engine compartment panel fuse replacement
■ Blade type fuse ■ Cartridge type fuse 1. Turn the vehicle off. 2. Turn all other switches OFF. 3. Remove the fuse panel cover by pressing the tap and pulling up. 4. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, use the fuse puller in the engine compartment fuse panel.
Categories
- Manuals Home
- Hyundai i30 Owners Manual
- Engine compartment
- Explanation of scheduled maintenance items
- Engine oil
- New on site
- Most important about car
