Hyundai i-30: Rear Glass Defogger / Components and components location
![](images/components_and_components_location-987/380/spdbe70240e.gif)
1. Body
control module (BCM)
2. Rear glass defogger switch
|
3. Rear
glass defogger
|
Repair procedures
Inspection
•
Wrap tin foil around the end of the voltmeter test lead to prevent
damaging the heater line...
Other information:
Description
The charging system includes a battery, an alternator with a built-in regulator,
and the charging indicator light and wire.
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal...
1. Be sure the vehicle is on level
ground.
2. Start the engine and allow it to reach
normal operating temperature.
3. Turn the engine off and wait for a
few minutes (about 5 minutes) for
the oil to return to the oil pan.
4. Pull the dipstick out, wipe it clean,
and re-insert it fully...
Categories
![Hyundai i30. signals](images/books/1/hyundai_i30_signals_259.png)
To signal a turn, push down on the
lever for a left turn or up for a right
turn in position (A). To signal a lane
change, move the turn signal lever
slightly and hold it in position (B).The
lever will return to the OFF position
when released or when the turn is
completed.
read more