Hyundai i-30: Starting System / Description and operation
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch, ignition lock switch, connection wires and the battery
cable.
When the ignition key is turned to the start position, current flows and energizes
the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch pinion
engages the ring gear.
The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter armature
when the engine starts, the clutch pinion gear overruns.
Troubleshooting
•
The battery must be in good condition and fully charged for
this troubleshooting...
Other information:
Inspection
Inspection Item
•
Battery efficiency inspection
•
Battery voltage inspection
•
Charging voltage insptection
•
General inspection
•
Terminal tightening state inspection
•
Engine/ transaxle ground state inspection
•
Wiring harness ground state inspection
•
Electrical Specified Value Inspection
•
Vehicle parasitic current inspection
•
Battery capacity inspection
Battery Efficiency Inspection
•
Check that the battery cables are connected to the correct terminals...
Special Service Tools
Tool (Number and Name)
Illustration
Use
09568-1S100
Saperate the ball joint from the front alxe
09546-3X100
Shock absorber lock nut removal tool
Used for remove the shock absorber lock nut...
Categories

(1) Driver’s door power window
switch
(2) Front passenger’s door power
window switch
(3) Rear door (right) power window
switch
(4) Rear door (left) power window
switch
(5) Window opening and closing
(6) Automatic power window
(7) Power window lock switch
read more