Hyundai i-30: Engine Electrical System
Hyundai i30 (PD) 2018-2025 Service Manual / Engine Electrical System
- Specifications
- Special service tools
- Charging System
- Description and operation
- Components and components location
- Troubleshooting
- Schematic diagrams
- Repair procedures
- Alternator
- DC DC converter
- Battery
- Battery Sensor
- Starting System
- Ignition System
EGR Cooler
Components and components location
Components
1. EGR Cooler
assembly
2. EGR cooler water inlet hose
3. EGR gas outlet hose
4...
Specifications
Service Data
Ignition System
Ignition Coil
Item
Specification
Rated Voltage (V)
13...
Other information:
Hyundai i30 (PD) 2018-2025 Service Manual: Repair procedures
Removal [Manual Transaxle Type] 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air duct and air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 3...
Hyundai i30 (PD) 2018-2025 Owner's Manual: Drive mode integrated control system
The drive mode may be selected according to the driver's preference or road condition. The system resets to be in the NORMAL mode (except if it is in ECO mode), when the engine is restarted. Information If there is a problem with the instrument cluster, the drive mode will be in NORMAL mode and may not change to SPORT mode...
Categories
- Manuals Home
- 3rd Generation i30 Owners Manual
- 3rd Generation i30 Service Manual
- Cruise control
- Headlamp, static bending lamp, position lamp, turn signal lamp and daytime running light bulb replacement
- Brake/clutch fluid
- New on site
- Most important about car
Turn signals and lane change signals
To signal a turn, push down on the lever for a left turn or up for a right turn in position (A). To signal a lane change, move the turn signal lever slightly and hold it in position (B).The lever will return to the OFF position when released or when the turn is completed.
Copyright © 2025 www.hi30.net