Hyundai i-30: Rear Seat Belt / Rear Center Seat Belt Retractor
Components and components location

1. Rear center
seat belt retractor
|
|
Repair procedures
•
|
When installing the belt, make sure not to damage the retractor.
|
|
1. |
Remove the luggage side trim.
(Refer to Interior Trim - "Luggage Side Trim")
|
2. |
After loosening the mounting bolts, remove the rear center seat belt
retractor (A).
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.8 - 39.8 lb-ft)
|

|
3. |
To install, reverse removal procedure.
• |
Replace any damaged clips.
|
|
|
Components and components location
Component Location
1. Rear seat
belt retractor
Repair procedures
Replacement
•
When installing the belt, make sure not to damage the retractor...
Components and components location
Component Location
1. Rear seat
belt buckle [RH]
2. Rear seat belt buckle [LH]
3...
Other information:
Whilst driving a corner, for greater
visibility and safety, either the left or
right side static bending light will turn
on automatically. The static bending
light will turn on when one of the following
conditions occur.
Vehicle speed is less than 6 mph
(10 km/h) and steering wheel angle
is turned approximately 80 degrees
with the low beam on...
Schematic diagrams
Circuit Diagram
Description and operation
Description
According to driving environment and loading state of vehicle, head lamp lighting
direction is changed to keep the driver's visibility range and to protect the
driver's vision from glare, aiming at safety driving...
Categories

1. Driver’s front air bag
2. Passenger’s front air bag
3. Side air bag*
4. Curtain air bag*
5. Knee air bag*
6. Front passenger air bag ON/OFF
switch
read more