Hyundai i-30: Brake System / Special service tools

Hyundai i30 (PD) 2018-2025 Service Manual / Brake System / Special service tools

Special Service Tools

Tool (Number and Name)	Illustration	Use
09581-2T100 Piston expander		Spreading the front disc brake piston.
09527-AL300 Sensor cap installer		Used for installing wheel speed sensor cap (Use with 09231-H1100)

Specifications

Specifications Item Specification Master cylinder Type Tandem Cylinder I...

Troubleshooting

Troubleshooting Problem Symptoms Table Use the table below to help you find the cause of the problem. The numbers indicate the priority of the like cause of the problem...

Other information:

Hyundai i30 (PD) 2018-2025 Service Manual: Manifold Absolute Pressure Sensor (MAPS)

Description and operation Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional to the pressure to the ECM...

Hyundai i30 (PD) 2018-2025 Service Manual: Front Lower Arm

Repair procedures Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from the front hub...

Categories

Turn signals and lane change signals

Hyundai i30. signals

To signal a turn, push down on the lever for a left turn or up for a right turn in position (A). To signal a lane change, move the turn signal lever slightly and hold it in position (B).The lever will return to the OFF position when released or when the turn is completed.