Hyundai i30 (PD): Light bulbs / High mounted stop lamp replacement
If the high mounted stop lamp does not operate, we recommend that you contact a HYUNDAI authorised repairer.
1. Loosen the pin-type retainers and screws of the rear wheel guard and then detach it from the rear bumper. 2. Reach your hand into the back of the rear bumper.
1. Using a flat-blade screwdriver, gently pry the lens cover from the lamp housing. 2. Remove the bulb by pulling it straight out. 3. Install a new bulb.
Other information:
Hyundai i30 (PD) 2018-2024 Owner's Manual: Trailer towing equipment
Towbars Information The mounting hole for towbars are located on both sides of the underbody behind the rear tyres. It's important to have the correct towbar equipment. Crosswinds, large trucks going by, and rough roads are a few reasons why you’ll need the right towbar.
Hyundai i30 (PD) 2018-2024 Owner's Manual: Brake/clutch fluid
Checking the brake/clutch fluid level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir. Before removing the reservoir cap and adding brake/clutch fluid, clean the area around the reservoir cap thoroughly to prevent brake/clutch fluid contaminati
Categories
- Manuals Home
- Hyundai i30 Owners Manual
- Low tyre pressure telltale
- Headlamp, static bending lamp, position lamp, turn signal lamp and daytime running light bulb replacement
- Battery replacement
- New on site
- Most important about car
