
The rear window wiper and washer switch is located at the end of the wiper and washer switch lever.
Turn the switch to the desired position to operate the rear wiper and washer.
2 – High wiper speed
1 – Low wiper speed
O – Off

Push the lever away from you to spray rear washer fluid and to run the rear wipers 1~3 cycles. The spray and wiper operation will continue until you release the lever. (if equipped)
Auto rear wiper (if equipped)
The rear wiper will operate whilst the vehicle is in reverse with the front wiper ON by selecting the function on the LCD display.
Go to ‘User Settings → Convenience → Auto Rear Wiper (reverse)’.
This vehicle has a "hidden" wiper design which means that the wipers cannot be lifted when they are in their bottom resting position. 1. Within 20 seconds of turning off the engine, move the wiper lever down and hold it to the position for about 2 seconds until the wipers move to the top wipe position.
Rear View Monitor ■ Type A ■ Type B ■ 5 Door ■ Wagon ■ Fastback The Rear View Monitor will activate when the engine is running and the shift lever is in the R (Reverse) position.
Filter replacement The air cleaner filter can be cleaned for inspection using compressed air. Do not attempt to wash or to rinse it, as water will damage the filter. If soiled, the air cleaner filter must be replaced. 1. Loosen the air cleaner cover attaching clips and open the cover.
A compressor label informs you the type of compressor your vehicle is equipped with such as model, supplier part number, production number, refrigerant (1) and refrigerant oil (2). Refrigerant label The refrigerant label provides information such as refrigerant type and amount.