
The Driver Attention Warning (DAW) system enters the ready status and displays the 'Standby' screen in the following situations.
- The camera does not detect the
lanes.
- Driving speed remains under 37
mph (60 km/h) or over 125 mph
(200 km/h).
The last break time is set to 00:00 and the driver's attention level is set to 5 (very attentive) when the driver resets the Driver Attention Warning (DAW) system.
DAW (Driver Attention Warning) system When the "Check DAW (Driver Attention Warning) system" warning message appears, the system is not working properly.
You can check the tyre pressure in the Assist mode on the cluster. Refer to the "LCD Display Modes" in chapter 3. Tyre pressure is displayed after a few minutes of driving after initial engine start up. If tyre pressure is not displayed when the vehicle is stopped, "Drive to display" message will appear.
Check your tyres, including the spare tyre, once a month or more. How to check Use a good quality tyre pressure gauge to check tyre pressure. You can not tell if your tyres are properly inflated simply by looking at them. Radial tyres may look properly inflated when they are under-inflated.