Hyundai i-30: Maintenance / Air cleaner
Filter replacement

The air cleaner filter can be cleaned
for inspection using compressed air.
Do not attempt to wash or to rinse it,
as water will damage the filter.
If soiled, the air cleaner filter must be
replaced.

1. Loosen the air cleaner cover
attaching clips and open the cover.

2. Wipe the inside of the air cleaner.
3. Replace the air cleaner filter.
4. Lock the cover with the cover
attaching clips.
5. Check that the cover is firmly
installed.
Information

Be sure to insert the hinge (A) before
locking the cover with the cover
attaching clips.
Information
If the vehicle is operated in extremely
dusty or sandy areas, replace the element
more often than the usual recommended
intervals.
NOTICE
- Do not drive with the air cleaner
filter removed. This will result in
excessive engine wear.
- When removing the air cleaner
filter, be careful that dust or dirt
does not enter the air intake, or
damage may result.
- Use HYUNDAI genuine parts.
Use of non-genuine parts could
damage the air flow sensor.
Draining water from fuel filter
The fuel filter in the diesel engine
operates the critical function of separating
water from the fuels and preventing
accumulating of water in the
base...
Filter inspection
If the vehicle is operated in the
severely air-polluted cities or on
dusty rough roads for a long period,
it should be inspected more frequently
and replaced earlier...
Other information:
When not using the ISOFIX system,
all Child Restraint Systems must be
secured to a rear seat with the lap
part of a lap/shoulder belt.
Installing a Child Restraint System
with a lap/shoulder belt
To install a Child Restraint System
on the rear seats, do the following:
1...
To install an i-Size or ISOFIX-compatible
Child Restraint System in either of
the rear outboard seating positions:
1. Move the seat belt buckle away
from the ISOFIX anchorages.
2. Move any other objects away from
the anchorages that could prevent
a secure connection between the
Child Restraint System and the
ISOFIX anchorages...
Categories

When the High Beam Assist (HBA)
System is not working properly, the
warning message will come on for a
few second. After the message disappears,
the master warning light (
)
will illuminate.
read more