Hyundai i-30: Interior Trim / Components and components location
Hyundai i30 (PD) 2018-2025 Service Manual / Body (Interior and Exterior) / Interior Trim / Components and components location
| Components |
| 1. Cowl side
trim 2. Center pillar lower trim 3. Front pillar trim 4. Door front scuff trim |
5. Center pillar
upper trim 6. Door rear scuff trim 7. Rear wheel house trim 8. Rear pillar trim |
Door Scuff Trim
Components and components location
Component Location
1. Front door
scuff trim
2. Rear door
scuff trim
Repair procedures
Replacement
•
Put on gloves to prevent hand injuries...
Other information:
Hyundai i30 (PD) 2018-2025 Service Manual: Fuel Pump Motor
Repair procedures Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - "Fuel Pump") 2. Disconnect the fuel pump motor connector (A) and the fuel sender connector (B)...
Hyundai i30 (PD) 2018-2025 Service Manual: Fuel Pressure Control Valve (FPCV)
Description and operation Description Fuel Pressure Control Valve (FPCV) is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition...
Categories
- Manuals Home
- 3rd Generation i30 Owners Manual
- 3rd Generation i30 Service Manual
- Cruise control
- FCA sensor
- Trip computer
- New on site
- Most important about car
Warning light and message
When the High Beam Assist (HBA)
System is not working properly, the
warning message will come on for a
few second. After the message disappears,
the master warning light (
)
will illuminate.
Copyright © 2025 www.hi30.net