Hyundai i-30: Evaporative Emission Control System / Fuel Filler Cap
Description and operation
A ratchet tightening device on the threaded fuel filler cap reduces the chances
of incorrect installation, which would seal the fuel filler. After the gasket
on the fuel filler cap and the filler neck flange contact each other, the ratchet
produces a loud clicking noise indicating the seal has been set.
Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery (-) terminal.
2...
Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery (-) terminal.
2...
Other information:
Fan speed control
The fan speed can be set as desired
by pushing the fan speed control button.
More air is delivered with higher fan
speeds.
Pressing the OFF button turns off the
fan.
NOTICE
Operating the fan when the ignition
switch is in the ON position could
cause the battery to discharge...
1. Insert the tongue plate (A) into the
buckle (A’) until an audible “click"
is heard, indicating the latch is
locked. Make sure the belt is not
twisted.
2. Pull the tongue plate (B) and
insert it into the buckle (B’) until an
audible “click” is heard, indicating
the latch is locked...
Categories
Seat belt warning
Driver’s seat belt warning
■ Instrument cluster
As a reminder to the driver, the seat
belt warning light will illuminate for
approximately 6 seconds each time
you turn the ignition switch ON
regardless of belt fastening.
read more