Hyundai i-30: Emission Control System

Hyundai i30 (PD) 2018-2025 Service Manual / Emission Control System

Spark Plug

Description and operation Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture therein by means of an electric spark, while containing combustion pressure within the engine...

Description and operation

Description Emissions control system consists of the three major systems. • Crankcase emission control system prevents blow-by gas from going into the atmosphere...

Other information:

Hyundai i30 (PD) 2018-2025 Service Manual: Air Ventilation Seat


Components and components location Component Location 1. Ventilation seat blower. 2. Ventilation seat unit (Assist seat only). Schematic diagrams Circuit Diagram Air Ventilation Unit Connector No Connecter A Connecter B Connecter C 1 Seat vent unit IGN 1 Driver vent switch led (Low) vent / heater power 2 Driver blower power Driver vent switch led (Mid) Driver heater power 3 Driver blower speed Driver vent switch led (High) Driver heater ground 4 Driver RPM input Driver NTC (+) Driver / Assist, Vent / Heater ground 5 Driver heater switch - vent / heater power 6 Driver vent switch Illumination (-) - 7 Illumination (+) Driver NTC (-) Assist heater power 8 Driver heater LED (Low) Driver blower ground - 9 Driver heater LED (Mid) Driver vent led (Low) Assist heater ground 10 Driver heater LED (High) Driver vent led (Mid) Driver / Assist, Vent / Heater ground 11 Vent seat unit IGN 2 Driver vent led (High) 12 Assist blower power Assist NTC (+) 13 Assist blower speed - 14 Assist blower RPM input - 15 Assist heater switch Assist NTC (-) 16 Assist vent switch Assist blower ground 17 Detent 18 Assist heater LED (Low) 19 Assist heater LED (Mid) 20 Assist heater LED (High) Repair procedures Removal [Ventilation Blower] 1...

Hyundai i30 (PD) 2018-2025 Service Manual: EGR Pressure Sensor


Description and operation Description The EGR Pressure Sensor is installed on the differential pressure valve and measures the pressure of the exhaust gas recirculation. Specifications Specification Pressure [kPa (kgf/cm², psi)] Output Voltage (V) 10 (0...

Categories

Bonnet

Opening the bonnet

Hyundai i30. Bonnet

1. Park the vehicle and set the parking brake.

2. Pull the release lever to unlatch the bonnet. The bonnet should pop open slightly.

Hyundai i30. Bonnet

read more


 
Copyright © 2025 www.hi30.net