Hyundai i-30: Evaporative Emission Control System / Fuel Tank Air Filter
Repair procedures
1. |
Turn the ignition switch OFF and disconnect the battery (-) terminal.
|
2. |
Disconnect the vent hose quick-connectors (A).

|
3. |
Remove the fuel tank air filter (A).
Tightening torque :
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 Ib-ft)
|

|
Description and operation
Description
A ratchet tightening device on the threaded fuel filler cap reduces the chances
of incorrect installation, which would seal the fuel filler...
Other information:
Components and components location
Components
1. DCT (Dual
Clutch Transmission) assembly
2. DCT support bracket
3. Roll rod support
bracket
Repair procedures
Removal
1...
Important Safety Notice
Proper service methods and repair procedures are essential for safe, reliable
operation of all motor vehicles as well as personal safety of the operator.
The service procedures and descriptions in this shop manual provide general
directions for service and repair...
Categories

When the High Beam Assist (HBA)
System is not working properly, the
warning message will come on for a
few second. After the message disappears,
the master warning light (
)
will illuminate.
read more