Hyundai i-30: Body Electrical System / Power Windows
Components and components location
Components
1. BSD Indicator
2. Side repeater
lamp
Repair procedures
Inspection
1...
Component Location
1. Driver power
window switch
2. Assist power window switch
3. Rear power window switch
4...
Other information:
Operating conditions
To operate:
Press the BCW switch with the
Ignition switch in the ON position.
The indicator on the BCW switch will
illuminate. When the vehicle speed
exceeds 20 mph (30 km/h), the system
will be activated.
To cancel:
Press the BCW switch again...
Description and operation
Description
The fuel pump control module (FPCM) is installed on the right side of the fuel
tank and controls the DC motor mounted inside the low pressure fuel pump.The
module compares instantaneous fuel pressure information measured by the fuel
pressure sensor (FPS) with target fuel pressure information provided by the
ECM and generates the desired target fuel pressure by controlling the fuel pump
motor and regulating fuel flow rate in the low pressure fuel line between the
low and high pressure fuel pumps...
Categories
![Hyundai i30. Power windows](images/books/1/hyundai_i30_power_windows_136.png)
(1) Driver’s door power window
switch
(2) Front passenger’s door power
window switch
(3) Rear door (right) power window
switch
(4) Rear door (left) power window
switch
(5) Window opening and closing
(6) Automatic power window
(7) Power window lock switch
read more