Hyundai i-30: Engine Control / Fuel System / Special service tools

Hyundai i30 (PD) 2018-2024 Service Manual / Engine Control / Fuel System / Special service tools

Special Service Tools

Tool (Number and Name)	Illustration	Application
Fuel Pressure Gauge (09353-24100)		Measuring the fuel line pressure
Fuel Pressure Gauge Adapter (09353-02100)		Connection between the high pressure fuel pump and the fuel feed line
Heated Oxygen Sensor Socket Wrench (09392-1Y100)		Removal and installation of the heated oxygen sensor
Torque Wrench Socket (09314-3Q100) or (09314-27130) (19mm)		Removal and installation of the high pressure fuel pipe
Injector Combustion Seal Guide & Sizing tool (09353-L1100)		Installation of the injector combustion seal
Fuel Pump Locking Ring Remover (09310-F3100)		Removal and installation of the fuel pump

Specifications

Specifications Fuel Delivery System Items Specification Fuel Tank Capacity 50 lit...

Basic Troubleshooting Basic Troubleshooting Guide Customer Problem Analysis Sheet Basic Inspection Procedure Measuring Condition of Electronic Parts' Resistance The measured resistance at high temperature after vehicle running may be high or low...

Other information:

Hyundai i30 (PD) 2018-2024 Service Manual: Rear Mud Guard

Repair procedures Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

Hyundai i30 (PD) 2018-2024 Service Manual: Rear Assist Arm

Repair procedures Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securelysupported. 2. Remove the rear wheel and tire (A) from the raerhub...

Hyundai i-30: Engine Control / Fuel System / Special service tools

Specifications

Troubleshooting

Other information:

Hyundai i30 (PD) 2018-2024 Service Manual: Rear Mud Guard

Hyundai i30 (PD) 2018-2024 Service Manual: Rear Assist Arm

Categories

Air bag - supplemental restraint system