Hyundai i-30: Interior features / Cigarette lighter

■ Type A

■ Type B
To use the cigarette lighter, the ignition
switch must be in the ACC or ON
position.
Push the cigarette lighter all the way
into its socket. When the element is
heated, the lighter will pop out to the
“ready” position.
We recommend that you use parts
for replacement from a HYUNDAI
authorised repairer.
WARNING
- Do not hold the lighter in after
it is already heated because it
will overheat.
- If the lighter does not pop out
within 30 seconds, remove it
to prevent overheating.
- Do not insert foreign objects
into the socket of the cigarette
lighter. It may damage the cigarette
lighter.
NOTICE
Only a genuine HYUNDAI lighter
should be used in the cigarette
lighter socket. The use of plug-in
accessories (shavers, hand-held
vacuums, and coffee pots, etc.)
may damage the socket or cause
electrical failure.
■ Front • Type A
■ Front • Type B
■ Centre
■ Rear
The power outlet is designed to provide
power for mobile telephones or
other devices designed to operate
with vehicle electrical systems...
■ Type A
■ Type B
There is a wireless mobile phone
charger inside the front console.
The system is available when all
doors are closed, and when the ignition
switch is in the ACC/ON position...
Other information:
Door, Bonnet, Tailgate open
This warning is displayed indicating
which door, or bonnet, or tailgate is
open.
CAUTION
Before driving the vehicle, you
should confirm that the door/
bonnet/tailgate is fully closed.
Also, check there is no door/
bonnet/tailgate open warning
light or message displayed on
the instrument cluster...
Anti-lock Brake System
(ABS) Warning Light
This warning light illuminates:
When you set the ignition switch or
the Engine Start/Stop button to the
ON position.
- It illuminates for approximately 3
seconds and then goes off.
When there is a malfunction with
the ABS (The normal braking system
will still be operational without
the assistance of the anti-lock
brake system)...
Categories

To signal a turn, push down on the
lever for a left turn or up for a right
turn in position (A). To signal a lane
change, move the turn signal lever
slightly and hold it in position (B).The
lever will return to the OFF position
when released or when the turn is
completed.
read more