Hyundai i-30: Front Axle Assembly. Front Hub / Knuckle / Components and components location
1. Brake disc
2. Hub bearing assembly
|
3. Dust cover
4. Knuckle
|
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2...
Other information:
Troubleshooting
Error Item
Failure symptom
Inspection items
Detailed inspections
Relevant Parts/
Components
Screen display
TFT-LCD screen does not turn on
1)
Connector attachments
2)
Components
1)
Check the connector attachments
2)
Check B+, IGN and GND wiring
3)
Check the components
Connectors, wiring, fuses, dashboard
Warning light
Airbag warning lamp malfunction
1)
Connector attachments
2)
C-CAN
3)
Components
1)
Check airbag + signal (connectors)
2)
Check C-CAN (ACU4) signal
3)
Check the FPC attachment inside the dashboard
ACU Connectors, wiring, fuses, dashboard
Mode conversion
Integrated driving mode malfunction
1)
Connector attachments
2)
Switch
3)
Components
1)
Check the switch input (connector)
2)
Check the switch signal input
(disconnection or shorting)
3)
Check conversion with dashboard component
Switch connector, wiring dashboard
Illumination
Interior light brightness cannot be controlled...
■ Type A
■ Type B
1. Loosen the pin-type retainers of
the under cover and then remove
the undercover.
2. Reach your hand into the back of
the front bumper.
3. Disconnect the power connector
from the socket.
4. Remove the bulb-socket from the
housing by turning the socket
counterclockwise until the tabs on
the socket align with the slots of
the housing...
Categories
Operating door locks from
outside the vehicle
Mechanical key
Turn the key toward the rear of the
vehicle to unlock and toward the front
of the vehicle to lock.
If you lock/unlock the driver's door
with a key, a driver’s door will
lock/unlock automatically.
read more