Hyundai i-30: Front Seat Belt / Components and components location
Hyundai i30 (PD) 2018-2025 Service Manual / Body (Interior and Exterior) / Front Seat Belt / Components and components location
| Components |
| 1. Height adjust |
2. Front seat
belt pretensioner |
Front Seat Belt Pretensioner
Components and components location
Component Location
1. Front seat
belt pretensioner
Repair procedures
Replacement
•
When installing the belt, make sure not to damage the pretensioner...
Other information:
Hyundai i30 (PD) 2018-2025 Service Manual: Input Speed Sensor
Specifications Specification Item Specification Type Hall effect sensor Output signal High: 11.8 - 16.8 mA Low: 5.9 - 8.4 mA Description and operation Description • Components location : DCT (Dual Clutch Transmission) • Function The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the Transmission Control Module (TCM)...
Hyundai i30 (PD) 2018-2025 Service Manual: Description and operation
Description Exhaust emissions (CO, HC, NOx) are controlled by a combination of engine modifications and the addition of special control components. Modifications to the combustion chamber, intake manifold, camshaft and ignition system form the basic control system...
Categories
- Manuals Home
- 3rd Generation i30 Owners Manual
- 3rd Generation i30 Service Manual
- Battery replacement
- Scheduled maintenance services
- Shift-lock system. Shift-lock release
- New on site
- Most important about car
Turn signals and lane change signals
To signal a turn, push down on the lever for a left turn or up for a right turn in position (A). To signal a lane change, move the turn signal lever slightly and hold it in position (B).The lever will return to the OFF position when released or when the turn is completed.
Copyright © 2025 www.hi30.net