Hyundai i-30: Body (Interior and Exterior) / Front Seat Belt
Components and components location
Components Location
1. Reat seat
latch [LH]
2. Reat seat
latch [RH]
Repair procedures
Replacement
[LH]
•
When prying with a flat-tip screwdriver or use a prying trim
tool, wrap it with protective tape, and apply protective tape
around the related parts, to prevent damage...
Other information:
Description and operation
Description
The Engine Coolant Temperature Sensor (ECTS) is located in the cylinder block
and cylinder head, and measures the temperature of the engine coolant.
The thermistor of the cooling water temperature and resistance has a negative
temperature coefficient (NTC) where the resistance decreases when the temperature
rises and the resistance increases when the temperature decreases...
Repair procedures
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securelysupported.
2.
Remove the rear wheel and tire (A) from the raerhub...
Categories
When the High Beam Assist (HBA)
System is not working properly, the
warning message will come on for a
few second. After the message disappears,
the master warning light ()
will illuminate.
read more