Hyundai i-30: Braking system / Electronic Parking Brake (EPB)
Applying the parking brake

To apply the EPB
(Electronic Parking Brake):
1. Depress the brake pedal.
2. Pull up the EPB switch.
Make sure the Parking Brake
Warning Light comes on.
WARNING
To reduce the risk of SERIOUS
INJURY or DEATH, do not operate
the EPB whilst the vehicle is
moving except in an emergency
situation. It could damage the
brake system and lead to an
accident.
Always set the parking brake before
leaving the vehicle, to apply:
Firmly depress the brake pedal.
Pull up the parking brake lever as far
as possible...
To release the EPB (Electronic
Parking Brake), press the EPB
switch in the following condition:
Place the Engine Start/Stop button
in the ON position...
Other information:
Components and components location
Components
1. BSD Indicator
2. Side repeater lamp
3. Puddle lamp
Repair procedures
Removal
Blind Spot Detection warning Indicator
1.
Disconnect the negative (-) battery terminal...
Repair procedures
Removal
Head Lamp Washer Motor
•
When servicing the washer pump, be careful not to damage the
washer pump seal...
Categories

(1) Driver’s door power window
switch
(2) Front passenger’s door power
window switch
(3) Rear door (right) power window
switch
(4) Rear door (left) power window
switch
(5) Window opening and closing
(6) Automatic power window
(7) Power window lock switch
read more