Hyundai i-30: ESP (Electronic Stability Program) System / ESP OFF Switch
Description and operation
1. |
The ESP OFF switch is for the user to turn off the ESP system.
|
2. |
The ESP OFF lamp is on when ESP OFF switch is engaged.
|
Repair procedures
1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable.
|
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")

|
3. |
Check the continuity between the switch terminals as the ESP OFF switch
is engaged.

|
Components and components location
Components
[LHD]
1. Front - right
tube
2. Rear - left tube
3. Rear - right tube
4...
Description and operation
Description
Introduction of Quick Brake Warning System (ESS)
In case of quick brake by driver, the brake lamp or turn signal is blinked to
warn against the vehicle at rear...
Other information:
Description
Idle Stop & Go (ISG) system switches off the ignition when vehicle is stopped,
and then restarts the ignition and starts the vehicle when accelerator is pushed.
It temporarily stops the engine while waiting for signal or idling to improve
fuel efficiency and reduce exhaust gas emission...
Description and operation
Description
It generates the oil pressure and temperature information (output voltage) to
control the pump operation proportional control valve in variable oil pump system.
It measures the oil pressure and temperature discharged from the oil pump and
transmits the pressure information to ECM...
Categories
Opening the bonnet

1. Park the vehicle and set the parking
brake.
2. Pull the release lever to unlatch
the bonnet. The bonnet should
pop open slightly.

read more