Hyundai i-30: Front Seat / Front Seat Shield Outer Cover
Components and components location

1. Front seat
shield outer cover
|
|
Repair procedures
•
|
Put on gloves to prevent hand injuries.
|
|
•
|
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components.
|
•
|
Use a plastic panel removal tool to remove interior trim pieces
without marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
2. |
Remove the front seat outer shield cover (A) by pulling forward in the
direction of the arrow using screw driver or remover.

|
3. |
Disconnect the front seat power switch connector (A).

|
4. |
To install, reverse removal procedure.
• |
Make sure the connector is plugged in properly.
|
• |
Replace any damaged clips (or pin-type retainers).
|
|
|
Components and components location
Component Location
1. Front seat
assembly
Repair procedures
Replacement
1...
Components and components location
Component Location
1. Front seat
shield inner cover
Repair procedures
Replacement
•
Put on gloves to prevent hand injuries...
Other information:
Description and operation
Description
TPMS Receiver : BCM(body control module) integrated management
1.
Mode
(1)
Virgin State
–
The receiver as a sole part is shipped in this state...
Repair procedures
Replacement
•
Put on gloves to prevent hand injuries.
•
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components...
Categories

1. Driver’s front air bag
2. Passenger’s front air bag
3. Side air bag*
4. Curtain air bag*
5. Knee air bag*
6. Front passenger air bag ON/OFF
switch
read more