Hyundai i-30: Exterior lights / Rear fog lamp
Vehicle with front fog lamp

To turn on the rear fog lamp:
Position the light switch in the position
lamp position, turn the light
switch (1) to the front fog lamp position,
and then turn the light switch (1)
to the rear fog lamp position.
To turn the rear fog lamps off, do one
of the following:
- Turn off the position light switch.
- Turn the light switch to the rear fog
lamp position again.
- When the light switch is in the position
lamp position, if you turn off
the front fog lamp, the rear fog
lamp will also turn off.
Vehicle without front fog lamp

To turn on the rear fog lamp:
Position the light switch in the headlamp
position, and then turn the light
switch (1) to the rear fog lamp position.
To turn the rear fog lamps off, do one
of the following:
- Turn off the headlamp switch.
- Turn the light switch to the rear fog
lamp position again.
Fog lamps are used to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.
Use the switch next to the headlamp
switch to turn the fog lamps ON and
OFF...
Battery saver function
The purpose of this feature is to prevent
the battery from being discharged.
The system automatically
turns off the position lamp when the
driver turns the engine off and opens
the driver-side door...
Other information:
You can check the tyre pressure in
the Assist mode on the cluster.
Refer to the "LCD Display
Modes" in chapter 3.
Tyre pressure is displayed after a
few minutes of driving after initial
engine start up.
If tyre pressure is not displayed when
the vehicle is stopped, "Drive to display"
message will appear...
Inspection
•
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components...