Hyundai i-30: Specifications & Consumer information / Recommended lubricants and capacities

Hyundai i30 (PD) 2018-2021 Owner's Manual / Specifications & Consumer information / Recommended lubricants and capacities

To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy.

These lubricants and fluids are recommended for use in your vehicle.

Hyundai i30. Recommended lubricants and capacities

*1 : Refer to the recommended SAE viscosity numbers on page 12.
*2 : Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost and energy savings.
*3 : Diesel Particulate Filter

Hyundai i30. Recommended lubricants and capacities

Recommended engine oil

Hyundai i30. Recommended lubricants and capacities

Recommended SAE viscosity number

CAUTION

Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant.This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged.

Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for satisfactory lubrication in hot weather. Using oils of any viscosity other than those recommended could result in engine damage.

When choosing an oil, consider the range of temperature your vehicle will be operated in before the next oil change. Proceed to select the recommended oil viscosity from the chart.

Hyundai i30. Recommended lubricants and capacities

■ Kappa 1.0/1.4 T-GDI

Hyundai i30. Recommended lubricants and capacities

■ Kappa 1.4 MPI

Hyundai i30. Recommended lubricants and capacities

■ Gamma 1.6 MPI

Hyundai i30. Recommended lubricants and capacities

■ U2 1.6 TCI

Hyundai i30. Recommended lubricants and capacities

■ Smartstream D1.6

    Load and speed capacity tyres, Air conditioning system, Vehicle weight and luggage volume

    Load and speed capacity tyres *1 LI : LOAD INDEX *2 SS : SPEED SYMBOL Air conditioning system Contact a HYUNDAI authorised repairer for more details...

    Vehicle identification number (VIN), Vehicle certification label, Tyre specification and pressure label

    Vehicle identification number (VIN) ■ Frame number The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc...

    Other information:

    Hyundai i30 (PD) 2018-2021 Owner's Manual: Panorama sunroof


    If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control lever located on the overhead console. The ignition switch must be in the ON position before you can open or close the sunroof. The sunroof can be operated for approximately 30 seconds after the ignition key is removed or turned to the ACC or LOCK(or OFF) position...

    Hyundai i30 (PD) 2018-2021 Owner's Manual: Child-protector rear door locks


    The child safety lock is provided to help prevent children seated in the rear from accidentally opening the rear doors. The rear door safety locks should be used whenever children are in the vehicle. The child safety lock is located on the edge of each rear door...

    Categories

    Seat belt warning light

    Seat belt warning

    Driver’s seat belt warning

    Hyundai i30. Seat belt warning light

    ■ Instrument cluster

    As a reminder to the driver, the seat belt warning light will illuminate for approximately 6 seconds each time you turn the ignition switch ON regardless of belt fastening.

    read more

     
    Copyright © 2021 www.hi30.net