Hyundai i-30: Specifications & Consumer information / Vehicle identification number (VIN), Vehicle certification label, Tyre specification and pressure label

Hyundai i30 (PD) 2018-2024 Owner's Manual / Specifications & Consumer information / Vehicle identification number (VIN), Vehicle certification label, Tyre specification and pressure label

Vehicle identification number (VIN)

Hyundai i30. specification and pressure label

■ Frame number

The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

The number is punched on the floor under the driver seat. To check the number, open the cover.

Hyundai i30. specification and pressure label

■ VIN label (if equipped)

The VIN is also on a plate attached to the top of the dashboard. The number on the plate can easily be seen through the windscreen from outside.

Vehicle certification label

Hyundai i30. specification and pressure label

The vehicle certification label attached on the driver’s (or front passenger’s) side centre pillar gives the vehicle identification number (VIN).

Tyre specification and pressure label

Hyundai i30. specification and pressure label

The tyres supplied on your new vehicle are chosen to provide the best performance for normal driving.

The tyre label located on the driver's side centre pillar gives the tyre pressures recommended for your vehicle.

    Recommended lubricants and capacities

    To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy...

    Engine number

    ..

    Other information:

    Hyundai i30 (PD) 2018-2024 Owner's Manual: Before driving


    Before entering the vehicle Be sure all windows, outside mirror( s), and outside lights are clean and unobstructed. Remove frost, snow, or ice. Visually check the tyres for uneven wear and damage. Check under the vehicle for any sign of leaks...

    Hyundai i30 (PD) 2018-2024 Service Manual: Description and operation


    Description • PDW consists of 8 sensors (front : 4 units, rear : 4 units) that are used to detect obstacles and transmit the result in three separate warning levels, the first, second and third to BCM via LIN communication...

    Categories

    Warning light and message

    Hyundai i30. Warning light and message

    When the High Beam Assist (HBA) System is not working properly, the warning message will come on for a few second. After the message disappears, the master warning light (Hyundai i30. Warning light and message) will illuminate.

    read more


     
    Copyright © 2024 www.hi30.net