Hyundai i-30: Cylinder Head Assembly / Components and components location

1. Camshaft
bearing cap
2. Exhaust camshaft bearing cap
3. Front camshaft bearing cap
4. Exhaust camshaft
5. Intake CVVD assembly
|
6. Exhaust
CVVT assembly
7. Intake CVVT assembly
8. Valve
9. Valve stem seal
10. Valve spring
11. Retainer
|
12. Hydraulic
lash adjuster (HLA)
13. Swing arm
14. Cam carrier
15. Camshaft position sensor
16. Cylinder head assembly
17. Cylinder head gasket
|
Components and components location
Components
1. Cylinder head
cover
2. Engine oil cap
3. Cylider head cover gasket
4...
Other information:
Blade inspection
Contamination of either the windscreen
or the wiper blades with foreign
matter can reduce the effectiveness
of the windscreen wipers.
Common sources of contamination
are insects, tree sap, and hot wax
treatments used by some commercial
car washes...
Repair procedures
Inspection
[Fuel Sender]
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the fuel pump assembly.
3.
Using an ohmmeter, measure the resistance between terminals 1 and 3
of sender connector (A) at each float level...
Categories

(1) Driver’s door power window
switch
(2) Front passenger’s door power
window switch
(3) Rear door (right) power window
switch
(4) Rear door (left) power window
switch
(5) Window opening and closing
(6) Automatic power window
(7) Power window lock switch
read more