Hyundai i-30: Engine Mechanical System / Cylinder Head Assembly
Hyundai i30 (PD) 2018-2024 Service Manual / Engine Mechanical System / Cylinder Head Assembly
- Components and components location
- Cylinder Head Cover
- CVVT & Camshaft
- CVVD Assembly
- Cylinder Head
- Vacuum Pump
Timing Chain
Components and components location
Components
1. Timing chain
2. Timing chain cam guide
3. Timing chain guide
4...
Components and components location
Components
1. Camshaft
bearing cap
2. Exhaust camshaft bearing cap
3. Front camshaft bearing cap
4. Exhaust camshaft
5...
Other information:
Hyundai i30 (PD) 2018-2024 Owner's Manual: BCW
Operating conditions To operate: Press the BCW switch with the Ignition switch in the ON position. The indicator on the BCW switch will illuminate. When the vehicle speed exceeds 20 mph (30 km/h), the system will be activated. To cancel: Press the BCW switch again...
Hyundai i30 (PD) 2018-2024 Service Manual: Exhaust Gas Temperature Sensor (EGTS)
Description and operation Description Exhaust Gas Temperature Sensor (EGTS) is installed on Gasoline Particulate Filter (GPF) senses the temperature of exhaust gas flowing into. When pre-determined engine condition is set, ECM burns soot gathered in GPF with exhaust gas...
Categories
- Manuals Home
- 3rd Generation i30 Owners Manual
- 3rd Generation i30 Service Manual
- Engine coolant
- Front windscreen wiper service position
- To activate the ISG system
- New on site
- Most important about car
Panorama sunroof
If your vehicle is equipped with a sunroof, you can slide or tilt your sunroof with the sunroof control lever located on the overhead console.
The ignition switch must be in the ON position before you can open or close the sunroof.
The sunroof can be operated for approximately 30 seconds after the ignition key is removed or turned to the ACC or LOCK(or OFF) position. However, if the front door is opened, the sunroof cannot be operated even within 30 seconds.
Copyright © 2024 www.hi30.net