Hyundai i-30: Hood / Hood Weatherstrip
Repair procedures
| Replacement |
| 1. |
Remove the hood weatherstrip (A).
|
| 2. |
To install, reverse removal procedure.
|
Hood Insulator Pad
Repair procedures
Replacement
1.
Using a clip remover, remove the clips and then the hood insulator pad
(A).
•
Be careful not to scratch the hood panel...
Hood Latch Release Handle
Components and components location
Component Location
1. Hood latch release handle
Repair procedures
Replacement
1...
Other information:
Hyundai i30 (PD) 2018-2025 Service Manual: Description and operation
Description Idle Stop & Go (ISG) system switches off the ignition when vehicle is stopped, and then restarts the ignition and starts the vehicle when accelerator is pushed. It temporarily stops the engine while waiting for signal or idling to improve fuel efficiency and reduce exhaust gas emission...
Hyundai i30 (PD) 2018-2025 Service Manual: GPF (Gasoline Particulate Filter)
Description and operation Description The Gasoline Particulate Filter (GPF) system prevents Particulate Matter (PM) from being discharged to the atmosphere and consists of a filter assembly, two Exhaust Gas Temperature Sensors (EGTS)...
Categories
- Manuals Home
- 3rd Generation i30 Owners Manual
- 3rd Generation i30 Service Manual
- LKA system operation
- Brake/clutch fluid
- Engine compartment
- New on site
- Most important about car
Door locks
Operating door locks from outside the vehicle
Mechanical key
Turn the key toward the rear of the vehicle to unlock and toward the front of the vehicle to lock.
If you lock/unlock the driver's door with a key, a driver’s door will lock/unlock automatically.
Copyright © 2025 www.hi30.net