Hyundai i-30: Lubrication System / Oil Level Gauge & Pipe
Repair procedures
1. |
Remove the oil level gauge (A).

|
2. |
Timing chain cover (A).
(Refer to Timing System - "Timing Chain Cover")
|
3. |
Remove the oil level pipe (A).
Tightening torque :
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.716 lb-ft)
|

|
4. |
Install in the reverse order of removal.
• |
Apply engine oil on the o-ring of the pipe before assembly.
|
|
|
Components and components location
Components
1. Oil Pan
2. Drain Plug
Repair procedures
Removal
1...
Other information:
Components and components location
Components
No
Connecter A
Connecter B
Connecter C
1
-
Battery (+)
Slide switch (Forward)
2
Reclining motor (Forward)
GND
Reclining switch (Forward)
3
Height motor (Up)
Battery (+)
Tilt switch (Up)
4
Slide motor (Forward)
-
Height switch (Up)
5
-
GND
-
6
Reclining motor (Backward)
B-CAN (High)
7
Tilt motor (Up)
B-CAN (High)
8
Tilt motor (Down)
IMS Switch 1
9
Height motor (Down)
Reclining switch (Forward)
10
Slide motor (Backward)
Slide sensor
11
Tilt sensor
12
-
13
Position sensor (Power)
14
IGN 1
15
Seat back slide switch (Forward)
16
Seat back reclining switch (Forward)
17
Tilt switch (Down)
18
Height switch (Down)
19
-
20
Ground
21
SET Switch
22
IMS Switch 2
23
Seat back limit switch (Backward)
24
Seat Reclining sensor
25
Seat height sensor
26
-
27
-
28
Battery (+)
Schematic diagrams
Circuit Diagram
Repair procedures
Removal
1...
Schematic Diagrams
[Without EPB]
[With EPB]
Termianal Function
[Without EPB]
Pin No
Description
Current
Max
Min
13
Ground for recirculation pump
39 A
10 A
1
Voltage supply for pump motor
39 A
10 A
25
Voltage supply for solenoid valves
15 A
2 A
38
Ground for solenoid valves and ECU
15 A
2 A
22
FL Wheel speed sensor signal
16...
Categories
Speedometer

The speedometer indicates the
speed of the vehicle and is calibrated
in kilometers per hour (km/h) and/or
miles per hour (MPH).
Tachometer

read more