Hyundai i-30: Clutch System / Clutch Pedal

Hyundai i30 (PD) 2018-2024 Service Manual / Clutch System / Clutch Pedal

Repair procedures

Removal [Manual Transaxle Type] 1. Turn ignition switch OFF and disconnect the negative (-) battery cable...

Components and components location

Components [Manual Transaxle Type] 1. Clutch pedal assembly 2. Clutch pedal arm 3. Ignition lock & clutch switch 4...

Other information:

Hyundai i30 (PD) 2018-2024 Service Manual: Electric Exhaust Gas Recirculation (EEGR) Control Valve


Description and operation Description The Electric EGR Control Valve is installed in between the EGR cooler and the exhaust line and is a solenoid valve. This valve controls EGR (Exhaust Gas Recirculation) amount by the ECM's duty control signal depending on engine load and the need of intake air...

Hyundai i30 (PD) 2018-2024 Service Manual: Repair procedures


Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up and down or from side to side and tighten the bolt. 2. Adjust the hood height by moving the hood overslam bumpers (C) up and down...

Categories

Bonnet

Opening the bonnet

Hyundai i30. Bonnet

1. Park the vehicle and set the parking brake.

2. Pull the release lever to unlatch the bonnet. The bonnet should pop open slightly.

Hyundai i30. Bonnet

read more


 
Copyright © 2024 www.hi30.net